Filling your Vaporesso XROS pod correctly is essential for ensuring the best performance, preventing leaks, and enhancing your overall vaping experience. Whether you’re using the 3ml pod or the UK-standard 2ml pod, this guide will provide you with comprehensive, step-by-step instructions on how to fill both types of Vaporesso XROS pods. We’ll also explain how to troubleshoot common issues and explore essential tips for prolonging your pod's life.

Introduction

The Vaporesso XROS series is one of the most popular pod systems on the market, known for its sleek design and ease of use. Whether you're a beginner or an experienced vaper, filling your XROS pod correctly is crucial for enjoying a smooth, flavorful vape. This guide will take you through the detailed process of filling both the 3ml and the 2ml pods, highlighting the design differences and sharing tips for the best results.

Also Read: https://vape4world.co.uk/blogs/news/how-to-refill-vaporesso

Key Differences Between the Vaporesso XROS 3ml and 2ml Pods

Both the 3ml and 2ml Vaporesso XROS pods offer the same fantastic performance but differ slightly in design. Let’s dive into these distinctions so you can better understand the filling process for each type.

• 3ml Pod (Typically Available Outside the UK)

• Design: This pod features a rubber plug that must be lifted to access the e-liquid fill port. It’s larger in size, offering a 3ml e-liquid capacity.

• Filling: The rubber plug design requires you to lift the plug and carefully fill the pod with e-liquid.

• Best For: Vapers who prefer a longer-lasting pod with fewer refills throughout the day.

• 2ml Pod (UK-Standard)

• Design: In compliance with the UK’s TPD (Tobacco Products Directive) regulations, the 2ml pod uses a snap-off mouthpiece design for easy and quick filling.

• Filling: Simply snap off the mouthpiece, fill the pod with e-liquid, and snap it back into place.

• Best For: UK vapers or those who prefer a more compact device with a legal e-liquid capacity.

Step-by-Step Guide: How to Fill the Vaporesso XROS 2ml Pod 

The 2ml Vaporesso XROS pod uses a different design, making it easier and quicker to fill due to the snap-off mouthpiece.

1. Remove the Pod

Remove the 2ml pod from your Vaporesso XROS device carefully, ensuring there is no excess e-liquid inside that could spill.

2. Snap Off the Mouthpiece

To access the fill port, gently snap off the mouthpiece. This design is especially convenient as it does not require any additional tools or complicated steps.

3. Fill with E-Liquid

Insert your e-liquid bottle nozzle into the fill port and slowly fill the pod. Be careful to avoid overfilling, leaving a small airspace to ensure smooth airflow and to prevent leakage.

4. Reattach the Mouthpiece

Once you’ve filled the pod, snap the mouthpiece back into place. Make sure it’s securely closed to avoid any e-liquid leakage.

5. Reinsert the Pod

Reinsert the pod into your Vaporesso XROS device. Ensure that it locks into place properly before you start vaping.

Step-by-Step Guide: How to Fill the Vaporesso XROS 3ml Pod

Filling the Vaporesso XROS 3ml pod is a relatively simple process, but you need to follow the steps carefully to avoid overfilling and leakage.

1. Remove the Pod

Gently pull the pod out of your Vaporesso XROS device. Make sure the pod is detached from the battery to avoid any spills during the filling process.

2. Lift the Rubber Plug

Locate the small rubber plug on the side of the pod. Carefully lift the rubber plug to reveal the e-liquid fill port. Take care not to damage the plug during this step to maintain a secure seal.

3. Fill with E-Liquid

Using your e-liquid bottle, insert the nozzle into the fill port and slowly squeeze the e-liquid into the pod. Make sure not to overfill, leaving a small air gap at the top to avoid leaks. A 50/50 VG/PG ratio is ideal for this pod system, providing a balanced vaping experience with smooth vapor and good flavor production.

4. Seal the Pod

Once you’ve filled the pod to the appropriate level, carefully seal the rubber plug. Ensure it fits securely to prevent any leaks when you reattach the pod to the device.

5. Reattach the Pod

Reinsert the pod into the Vaporesso XROS device. Ensure it clicks into place firmly, signaling that the pod is securely attached.

Avoiding Common Mistakes when Felling Vaporesso Pods

To ensure you don’t run into issues like leaks or dry hits, keep these tips in mind:

• Leave Some Airspace: Always leave a small air gap at the top of the pod to avoid overfilling and leaking.

• Seal the Pod Properly: Ensure the rubber plug (on the 3ml pod) or mouthpiece (on the 2ml pod) is securely closed to prevent leaks.

• Use the Right E-Liquid: For the best results, use e-liquids with a 50/50 VG/PG ratio. Nicotine salt e-liquids are ideal for MTL (mouth-to-lung) vaping and work perfectly with the Vaporesso XROS system.

• Prime Your Coil: After filling, let your pod sit for 5 minutes to allow the coil to fully saturate. This will prevent dry hits and enhance the flavor experience.

Fixing Issues with Vaporesso XROS Pods

Even with the best filling practices, you may run into occasional issues. Here’s how to troubleshoot them:

• Leaking

• Cause: Overfilling the pod or not sealing the pod properly can cause e-liquid to leak.

• Solution: Ensure you leave enough airspace and double-check that the rubber plug or mouthpiece is fully secured.

• Weak Flavor

• Cause: A coil that’s not properly primed or clogged can result in weak flavor.

• Solution: Always prime your coil before using the pod and clean the connections to maintain a strong flavor profile.

• Dry Hits

• Cause: Dry hits are often caused by a lack of e-liquid in the pod or improper priming of the coil.

• Solution: Make sure to refill the pod when necessary and let it sit for a few minutes to ensure proper coil saturation.

Recommended E-Liquids for Vaporesso XROS Pods

For optimal performance, use e-liquids with a balanced VG/PG ratio of 50/50. This ratio ensures that the e-liquid can wick properly into the coil while still providing great vapor and flavor. If you’re using a nicotine salt e-liquid, you'll enjoy a smoother throat hit that’s ideal for MTL vaping.

How to Maintain Your Vaporesso XROS Pods for Longevity

Proper maintenance and cleaning are essential to keeping your Vaporesso XROS pods in top condition. Here’s how to clean and maintain your pods:

• Clean Regularly: Remove any excess e-liquid or residue from the pod and device connections using a soft cloth or tissue.

• Avoid Using High VG E-Liquids: High VG e-liquids are thicker and can cause poor wicking in MTL pods like the XROS, leading to dry hits.

• Replace Coils as Needed: Replace the coil or pod when you notice a burnt taste or when the vapor production decreases significantly.

Conclusion

Filling your Vaporesso XROS pod is easy if you follow the right steps. Whether you're using the 3ml pod with a rubber plug or the 2ml pod with a snap-off mouthpiece, filling it properly will make a big difference in your vaping experience. With the tips on troubleshooting, e-liquid suggestions, and maintenance, you'll be able to keep your pods working well for longer and enjoy better flavor. For all your vaping needs, including Vaporesso products, visit Vape4World for top-quality options..

FAQs

When Should I Change the Pod in Vaporesso XROS 3?

Change the pod when flavor weakens, vapor production decreases, or if you experience a burnt taste or dry hits. Typically, the pod lasts 1-2 weeks.

How Do I Open the Pod on Vaporesso XROS 3?

For the 3ml pod, lift the rubber plug. For the 2ml UK pod, snap off the mouthpiece to access the fill port.

How Do I Empty the Pod in Vaporesso XROS 3?

Remove the pod, tilt it, and pour out the e-liquid. Clean with a cloth to remove any excess liquid.

Is XROS 3 Better Than XROS 2?

Yes, the XROS 3 offers improved airflow control, a longer battery life, and a more refined design, making it a better choice for those seeking a customizable and longer-lasting vaping experience.

How Long Do XROS 2 Pods Last?

XROS 2 pods typically last around 1-2 weeks, depending on usage. Replace the pod when you notice a decrease in flavor, vapor production, or if you experience dry hits.